§ 17.1. Schedule limiting height, size, density, and area by zoning district.
The following regulations regarding lot sizes, yards, setbacks, building heights, and densities apply within the zoning districts as indicated, including the regulations contained in section 17.2, Notes to Schedule of Regulations. No building shall be erected, nor shall an existing building be altered, enlarged or rebuilt, nor shall any open spaces surrounding any building be encroached upon or reduced in any manner, except in conformity with the regulations hereby established for the district in which such building is located. No portion of lot used in complying with the provisions of this Ordinance for yards, courts, lot area occupancy, in connection with an existing or projected building or structure, shall again be used to qualify or justify any other building or structure existing or intended to exist at the same time.
Zoning District Min. Size Per Zoning Lot (a) Max. Building Height Max.
Building
Lot
Coverage
(%)Min. Yard Setback
Requirements Per Zoning
Lot in Ft. (b)(c)(d)(e)(k)Min. Liveable Floor Area In Square Feet (e)(f) Max. Gross Density in Units Per Acre Area in square feet Width in Ft. In
StoriesIn
FeetFront (g)(h) Each Side Rear R-C,
Recreation
Conservation
District (t)1 ac 150 1 15 30 25 25 50 R-A,
Single-Family
Residential (i)8,500 66 2.5 30 35 25 7.5 40 1,200 5.12 R-T,
Residential
Transitional
District8,500 66 2.5 30 35 25 7.5 40 1,200 5.12 R-M,
Residential
Multiple-Family
(m)(n)7,000 (j) 70 3 40 40 25 15 (l) 30 10 C-1,
Central
Business District2 25 (o) (r) 30 (q) C-2,
Service
Business District1 20 (o) 25 (p) 15 (r) 30 (q) C-3,
General
Business District3
above
ground40 (o) 25 (p) 15 (r) 30 (q) I-M,
Industrial
Manufacturing
District1 ac 150 1 30 (o) 25 (p) 25 (r) 50(q)(s)
(Ord. No. 179, § 1, 2-4-02)